Difference between revisions of "PowerEdge 1950 Debian install"
Jump to navigation
Jump to search
m (→BIOS Settings) |
|||
| Line 6: | Line 6: | ||
= Updating firmware = |
= Updating firmware = |
||
= Debian Install image locations = |
= Debian Install image locations = |
||
| + | http://cdimage.debian.org/debian-cd/6.0.3/amd64/iso-cd/debian-6.0.3-amd64-netinst.iso |
||
| + | |||
= non-Free firmware for Ethernet cards = |
= non-Free firmware for Ethernet cards = |
||
PowerEdge 1950 machines have 2 on-board Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet adapters. Firmware for adapters is non-free and must be loaded to perform the Debian installation. |
PowerEdge 1950 machines have 2 on-board Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet adapters. Firmware for adapters is non-free and must be loaded to perform the Debian installation. |
||
Revision as of 18:20, 21 January 2012
BIOS Settings
- Turn on virtualization
- Lots of options regarding console redirection over serial. Need to investigate.
IPMI
Updating firmware
Debian Install image locations
http://cdimage.debian.org/debian-cd/6.0.3/amd64/iso-cd/debian-6.0.3-amd64-netinst.iso
non-Free firmware for Ethernet cards
PowerEdge 1950 machines have 2 on-board Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet adapters. Firmware for adapters is non-free and must be loaded to perform the Debian installation.
An ISO image is available at http://cdimage.debian.org/cdimage/unofficial/non-free/cd-including-firmware/6.0.3/amd64/iso-cd/ which should include the bits necessary to use these adapters during the OS installation
http://wiki.debian.org/Firmware has a discussion of issues surrounding the non-free firmware needed by these systems and its use in Debian.